dmesg - Western Digital WD1600BB-00G
Linux version 3.7.4-ck1 (root@Linux) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sun Jan 27 14:37:08 IST 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffaffff] ACPI data
BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-GS FX, BIOS P1.30 07/04/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbff9ffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbff9ffff] page 4k
kernel direct mapping tables up to 0xbff9ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xbff9e000-0xbff9ffff]
RAMDISK: [mem 0x35776000-0x36bb2fff]
ACPI: RSDP 00000000000fbf20 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bffa0000 00040 (v01 070412 RSDT1201 20120704 MSFT 00000097)
ACPI: FACP 00000000bffa0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 00000000bffa0470 04D0C (v01 AS626 AS626121 00000121 INTL 20051117)
ACPI: FACS 00000000bffb0000 00040
ACPI: APIC 00000000bffa0390 000A0 (v01 070412 APIC1201 20120704 MSFT 00000097)
ACPI: MCFG 00000000bffa0430 0003C (v01 070412 OEMMCFG 20120704 MSFT 00000097)
ACPI: OEMB 00000000bffb0040 00072 (v01 070412 OEMB1201 20120704 MSFT 00000097)
ACPI: SRAT 00000000bffaa470 000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: AAFT 00000000bffaa540 0002E (v01 070412 OEMAAFT 20120704 MSFT 00000097)
ACPI: HPET 00000000bffaa570 00038 (v01 070412 OEMHPET0 20120704 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012ba00000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xbff9ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 982831
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 765920 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bffa0000 - 00000000bffb0000
PM: Registered nosave memory: 00000000bffb0000 - 00000000bffe0000
PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s81792 r8192 d20608 u262144
pcpu-alloc: s81792 r8192 d20608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 963369
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ b4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 3701820k/4980736k available (4511k kernel code, 1049412k absent, 229504k reserved, 2684k data, 612k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:33024 nr_irqs:4776 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3013.663 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.32 BogoMIPS (lpj=3013663)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20120913
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (fam: 10, model: 06, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12054.65 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbffb0000-0xbffdffff] (196608 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xf0000000-0xf7ffffff]
node 0 link 0: mmio [f0000000, f7ffffff] ==> none
node 0 link 0: mmio [d0000000, efffffff]
node 0 link 0: mmio [f8000000, fe0bffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xd0000000-0xefffffff]
bus: 00 [mem 0xf8000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xeffff000-0xefffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xefffec00-0xefffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 10: [mem 0xefff8000-0xefffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 10: [mem 0xefffd000-0xefffdfff]
pci 0000:00:07.0: reg 14: [io 0xe080-0xe087]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 10: [io 0xe000-0xe007]
pci 0000:00:08.0: reg 14: [io 0xdc00-0xdc03]
pci 0000:00:08.0: reg 18: [io 0xd880-0xd887]
pci 0000:00:08.0: reg 1c: [io 0xd800-0xd803]
pci 0000:00:08.0: reg 20: [io 0xd480-0xd48f]
pci 0000:00:08.0: reg 24: [mem 0xefffc000-0xefffcfff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 10: [io 0xd400-0xd407]
pci 0000:00:08.1: reg 14: [io 0xd080-0xd083]
pci 0000:00:08.1: reg 18: [io 0xd000-0xd007]
pci 0000:00:08.1: reg 1c: [io 0xcc00-0xcc03]
pci 0000:00:08.1: reg 20: [io 0xc880-0xc88f]
pci 0000:00:08.1: reg 24: [mem 0xefff7000-0xefff7fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
pci 0000:00:0d.0: reg 10: [mem 0xee000000-0xeeffffff]
pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xed000000-0xedffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0xeffc0000-0xeffdffff pref]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:0d.0
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xefffffff window]
pnp 00:00: [mem 0xf8000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0061]
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0378-0x037f]
pnp 00:04: [io 0x0778-0x077f]
pnp 00:04: [irq 7]
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: [mem 0x000d0000-0x000d3fff window]
pnp 00:05: [mem 0x000d4000-0x000d7fff window]
pnp 00:05: [mem 0x000de000-0x000dffff window]
pnp 00:05: [io 0x0010-0x001f]
pnp 00:05: [io 0x0022-0x003f]
pnp 00:05: [io 0x0044-0x004d]
pnp 00:05: [io 0x0050-0x005f]
pnp 00:05: [io 0x0062-0x0063]
pnp 00:05: [io 0x0065-0x006f]
pnp 00:05: [io 0x0072-0x007f]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0084-0x0086]
pnp 00:05: [io 0x0088]
pnp 00:05: [io 0x008c-0x008e]
pnp 00:05: [io 0x0090-0x009f]
pnp 00:05: [io 0x00a2-0x00bf]
pnp 00:05: [io 0x00e0-0x00ef]
pnp 00:05: [io 0x04d0-0x04d1]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x0580-0x05ff]
pnp 00:05: [io 0x0800-0x087f]
pnp 00:05: [io 0x0880-0x08ff]
pnp 00:05: [io 0x0d00-0x0d7f]
pnp 00:05: [io 0x0d80-0x0dff]
pnp 00:05: [io 0x1100-0x117f]
pnp 00:05: [io 0x1180-0x11ff]
pnp 00:05: [mem 0xfec80000-0xfecfffff]
pnp 00:05: [mem 0xfefe0000-0xfefe01ff]
pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
pnp 00:05: [mem 0xfee01000-0xfeefffff]
pnp 00:05: [mem 0xffb80000-0xffffffff]
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x0580-0x05ff] has been reserved
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: [io 0x0880-0x08ff] has been reserved
system 00:05: [io 0x0d00-0x0d7f] has been reserved
system 00:05: [io 0x0d80-0x0dff] has been reserved
system 00:05: [io 0x1100-0x117f] has been reserved
system 00:05: [io 0x1180-0x11ff] has been reserved
system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
system 00:05: [mem 0xfec80000-0xfecfffff] has been reserved
system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [mem 0xfed00000-0xfed00fff]
pnp 00:06: [irq 2 disabled]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: [io 0x0280-0x028f]
pnp 00:0b: [io 0x0290-0x029f]
system 00:0b: [io 0x0280-0x028f] has been reserved
system 00:0b: [io 0x0290-0x029f] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xf0000000-0xf7ffffff]
system 00:0c: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0xcfffffff]
pnp 00:0d: [mem 0xfec00000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20724k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1359311974.471:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7399
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
GHES: HEST is not enabled!
XENFS: not registering filesystem on non-xen platform
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: vegas registered
TCP: yeah registered
Key type dns_resolver registered
registered taskstats version 1
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
Freeing unused kernel memory: 612k freed
BFS CPU scheduler v0.426 by Con Kolivas.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[551]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
forcedeth 0000:00:07.0: setting latency timer to 64
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ACPI: bus type scsi registered
libata version 3.00 loaded.
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr bc:5f:f4:64:dd:79
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xefffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.4-ck1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xeffff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.4-ck1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
nouveau 0000:00:0d.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 20
nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
nouveau [ DEVICE][0000:00:0d.0] Family : NV40
nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
nouveau [ VBIOS][0000:00:0d.0] BIT signature found
nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.28
nouveau [ PFB][0000:00:0d.0] RAM type: unknown
nouveau [ PFB][0000:00:0d.0] RAM size: 256 MiB
[TTM] Zone kernel: Available graphics memory: 1894562 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 253 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 05.61.32.28
nouveau [ DRM] TMDS table version 1.1
nouveau [ DRM] DCB version 3.0
nouveau [ DRM] DCB outp 00: 01000310 00000023
nouveau [ DRM] DCB outp 01: 00110204 942b0003
nouveau [ DRM] DCB conn 00: 0000
nouveau [ DRM] DCB conn 01: 1131
nouveau [ DRM] DCB conn 02: 0110
nouveau [ DRM] DCB conn 03: 0111
nouveau [ DRM] DCB conn 04: 0113
nouveau [ DRM] Saving VGA fonts
nouveau W[ DRM] DCB type 4 not known
nouveau W[ DRM] Unknown-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 1 available performance level(s)
nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
nouveau [ DRM] c:
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] allocated 1600x900 fb: 0x9000, bo ffff880126fe5400
fbcon: nouveaufb (fb0) is primary device
ata1.00: HPA detected: current 312579695, native 312581808
ata1.00: ATA-6: WDC WD1600BB-00GUC0, 08.02D08, max UDMA/100
ata1.00: 312579695 sectors, multi 16: LBA48
ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x15)
ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x15)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/66
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BB-00G 08.0 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5
ata2: port disabled--ignoring
ACPI: Invalid Power Resource to register!
Console: switching to colour frame buffer device 200x56
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 23
ata4: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 23
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 22
ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-2: new full-speed USB device number 2 using ohci_hcd
usb 2-2: New USB device found, idVendor=03f0, idProduct=4f11
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Officejet 5600 series
usb 2-2: Manufacturer: HP
usb 2-2: SerialNumber: CN63GDE3D204B2
tsc: Refined TSC clocksource calibration: 3013.705 MHz
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST3500413AS, JC45, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: failed to get Identify Device Data, Emask 0x1
ata4.00: failed to get Identify Device Data, Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
usb 2-3: new low-speed USB device number 3 using ohci_hcd
usb 2-3: New USB device found, idVendor=045e, idProduct=00cb
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Microsoft Basic Optical Mouse v2.0
usb 2-3: Manufacturer: Microsoft
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 3:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
Btrfs loaded
ACPI: Invalid Power Resource to register!
device fsid 9b48bdf1-1fd9-4f5f-bea9-b4b178415ffd devid 1 transid 4559 /dev/sda7
device fsid ea7b69d3-e8dd-4ef9-9ea0-480bf89cc4c0 devid 1 transid 11044 /dev/sda6
Adding 1999868k swap on /dev/sda5. Priority:-1 extents:1 across:1999868k
udevd[841]: starting version 175
Did not find alt setting 1 for intf 0, config 1
microcode: CPU0: patch_level=0x010000c7
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-3/input0
i2c i2c-4: nForce2 SMBus adapter at 0x600
ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usblp 2-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
usbcore: registered new interface driver usblp
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x010000c7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input4
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
btrfs: unlinked 4 orphans
usb 2-3: USB disconnect, device number 3
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-3: new low-speed USB device number 4 using ohci_hcd
usb 2-3: New USB device found, idVendor=045e, idProduct=00cb
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Microsoft Basic Optical Mouse v2.0
usb 2-3: Manufacturer: Microsoft
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input7
hid-generic 0003:045E:00CB.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-3/input0
device fsid 9b48bdf1-1fd9-4f5f-bea9-b4b178415ffd devid 1 transid 4559 /dev/sda7
btrfs: unlinked 12 orphans
init: failsafe main process (1307) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:07.0 eth0: MSI enabled
NET: Registered protocol family 17
init: plymouth-stop pre-start process (1690) terminated with status 1
fuse init (API version 7.20)
usb 2-2: USB disconnect, device number 2
usblp0: removed
usb 2-2: new full-speed USB device number 5 using ohci_hcd
usb 2-2: New USB device found, idVendor=03f0, idProduct=4f11
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: Officejet 5600 series
usb 2-2: Manufacturer: HP
usb 2-2: SerialNumber: CN63GDE3D204B2
usblp 2-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
usblp0: removed
usblp 2-2:1.1: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
usblp0: removed
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
usb 2-2: USB disconnect, device number 5